The P2000 Insulation System is a new super-efficient thermal insulation product that delivers outstanding insulation protection. It's tested! It's approved! And it works!

The P2000 Insulation System can be used for many applications:

• New construction and renovation.
• Residential and commercial buildings.
• Interior and exterior.
• Wood frame, steel, and concrete structures.
• Most any insulating project.

• Ceilings
  
• Excellent for vaulted ceilings.
• Easy application for new construction - insulation and vapour barrier in one.
• Easy retro-fit - apply over existing ceiling - strap (optional) - sheetrock.
  
• Floors
  
• Under concrete radiant heat slabs and other radiant floor systems.
• Concrete basement floors (below or as part of sub-floor).
• Under crawl spaces.
• Ideal for mini/mobile home floors.
  
• Walls
  
• Achieve R20+ performance in a 2" x 4" wall.
• Outside - apply under siding, brick, stucco, steel, etc.
• Inside - apply over studs or existing walls (Eg. Lathe & Plaster) without messy tear-out.
• Basement walls - applied directly to concrete.
  
• Attics
  
• Apply under trusses or on underside of rafters.
• A quick efficient way to insulate.
  
• Roofs
  
• Apply above or below roof framing (wood or steel) - with steel, aluminum, even asphalt shingles.
  
• Plumbing & Ductwork
  
• Covering ductwork (to avoid formation of condensation).
• Insulate water heaters, pipes under floors, pump houses, etc.
  
• Other Applications
  
• Cold storage - cold rooms, walk-in freezers.
• Agricultural & industrial buildings - white ceilings with P2000 applying sheathing, white finish, vapour barrier & insulation in one application.
• Removable insulation panels / to block off rooms, insulate windows.

How it Works

Insulation & Heat Loss

• Insulation effectively reduces the rate of heat loss (winter) and heat gain (summer).
• It is commonly believed a well insulated wall must be a thick wall
• P2000 defies conventional thinking by delivering high performance insulation with a thin board product.

3 Types of Heat - 3 Types of Heat Loss/Gain

• Conduction - transfer of heat through solids (heat on a warm floor).
• Convection - transfer of heat through the air (hot air from a heat vent).
• Radiation - transfer of energy (not heat) that becomes heat once absorbed by objects - (sunlight is radiant energy).

Radiant Heat

• Radiant heat energy accounts for:
• 50 - 75% of building heat loss in the winter heating season.
• up to 93% of heat gain in the summer (resulting in higher air conditioning costs).

But most insulations have little/no effect on radiant heat.

Insulating Radiant Heat

Radiant energy can be controlled using radiant "blockers" - special materials that reflect radiant energy.

This means P2000 Insulation blocks the transfer of radiant heat energy - which significantly:.

• Reduces heat loss (winter)
• and reduces heat gain (summer).

What else makes The P2000 Insulation System so efficient

• P2000's special EPS foam core (similar to a foam cup) provides another level of insulation protection. Most of the energy that is not blocked by reflective laminates is absorbed by the foam core.

• P2000 has a seaming system - providing double seal protection against wind, cold, and moisture.

• P2000 is an insulator and vapour barrier in one.

• P2000's foam core is virtually waterproof.

• P2000 installs accross walls - thus eliminating thermal bridging through wood / steel framing.

• P2000 does not sag, settle, rot, gas-off, or absorb moisture (which can reduce insulation performance) in other insulation products.

20 Year Warranty!

We believe that a product is as good as its warranty. The P2000 Insulation System^TM really Works, so we offer a 20 year warranty on our product.

So as long as the insulation is installed in accordance with our Application Guide, P2000^TM will replace defective insulation - for up to 20 years after purchase! Read our warranty.