Polyaspartic Kit - Top Coat - Low Odor - Transparent (2 Gallon Kit (POLYSTAR WT 85)
Our cutting-edge coating system, referred to as PolyStar WT 85, stands as a versatile two-component solution, featuring a balanced 1:1 ratio. This product serves the dual purpose of being a colored basecoat and a crystal-clear topcoat. It excels in rapid turnaround and swift curing under standard conditions, typically becoming tack-free in approximately 180 minutes. This, in turn, enables the installation of a complete flooring system in just one day. PolyStar WT 85 distinguishes itself through superior mechanical and chemical properties, demanding minimal maintenance. Moreover, it offers full UV stability, culminating in a flawless aesthetic finish. For more in-depth information, kindly reach out to a representative from our dedicated team.
SAFETY MEASURES
Prioritizing safety during the handling of our product is paramount. To prevent skin contact, as some individuals may exhibit allergic reactions to the materials used, we strongly advocate the use of protective gloves, eyewear, appropriate attire, and ensuring proper ventilation. For comprehensive insights and guidance on the safe handling, storage, and disposal of chemical products, we urge you to consult the latest Safety Data Sheet (SDS) for Polystar WT 85. This resource contains essential physical, ecological, toxicological, and other safety-related data.
— KEEP OUT OF REACH OF CHILDREN
— KEEP FROM FREEZING CONDITIONS
— INTENDED FOR INDUSTRIAL USE ONLY
Disclaimer: Our recommendations and information pertaining to the application and utilization of our products are based on our extensive knowledge and experience, provided in utmost good faith. Nevertheless, the actual variances in materials, differences in substrates, and on-site conditions may have implications on the product’s performance. Consequently, no warranty or liability can be inferred from this information or any recommendations. Users bear the responsibility of conducting their product testing tailored to their specific application and purpose. We strongly emphasize respecting the proprietary rights of third parties. All orders are subject to our prevailing terms of sale and delivery. For the most recent local product Technical Data Sheet related to the specific product, please don’t hesitate to request it.
Product Compliance: Our system has secured approval from the pertinent regulatory bodies, including the Canadian Food Inspection Agency (C.F.I.A).
ADVANTAGES
- Minimal odor
- Self-priming
- Compliant with VOC regulations
- Outstanding color stability
- High sheen
- Exceptional chemical resistance
- Low maintenance requirements
- Outstanding elongation and abrasion resistance
- Superior mechanical and chemical properties
- Extended working time
- Seamlessly applied coating
- Aliphatic in nature
- Multi-coat application in a single day
- Resistant to impermeability and mold
- Compliant with VOC and EPA regulations in all states and Canadian provinces, including CIFA, USDA, and FDA
- Meets food safety standards
APPLICATIONS
- Medical centers
- Research labs
- Drug manufacturing facilities
- Production and assembly plants
- Food processing factories
- Kitchen areas
- Restrooms and bathing spaces
- Educational institutions
- Shopping complexes
- Retail outlets
- Corporate office spaces
- Storage facilities
- Vehicle repair shops
- Display areas
- Community spaces
- Hallways and walkways
- Mixed residential and business projects
CONTENT PACKAGING
The PolyStar WT 85 kit encompasses Resin Part A and Part B Hardener.
The kit configuration includes:
Part A Part B
2 Gallons Kit 1 Gallon 1 Gallon
Properties |
Values |
References |
Compressive Strength |
14,000 psi – 96MPa |
ASTM C 579 |
Flexural Strength |
3,700 psi – 25.5MPa |
ASTM D 790 |
Tensile Strength |
8,000 psi – 55.2MPa |
ASTM D 638 |
Bond Strength (concrete) |
350psi – (2.4) |
ASTM D 4541 |
Flammability |
Self-extinguisher |
ASTM D 635 |
Hardness (Shore D): Water Absorption |
>65 < 0.1% < 0.1% |
ASTM D 2240 ASTM D 570 MIL D 3134 |
Impact Resistance |
No chipping, cracking, or delaminating |
ASTM D 2240 |
Flash Point |
>200 °F - >93 °C |
|
Abrasion Resistance (CS-17 Wheel, 1,000 g load, 1,000 cycles) |
58 mg loss |
ASTM D 4060 |
Data |
Values |
Volumetric Ratio |
1A:1B |
Solid Content |
85% |
*Coverage (Wet Mils) |
150 - 200 SQ. FT. |
**Application Temperature |
50-90 °F (10-32 °C) |
Min Substrate Temperature |
33 °F (1 °C) |
Thinner |
Not required |
Pot Life @ 21ºC |
10-15 minutes |
**Drying / Curing Time (Working time) |
25 minutes |
Tack Free |
2 hours |
Light Foot Traffic |
5-7 hours |
Traffic |
24 hours |
Max Curing Time for resurfacing |
24 hours |
Shelf Life |
12 months |
USDA Food & Beverage & CFIA |
Meets the requirements |
**Based at 71.6oF (22 °C) & 55% relative humidity. Higher temperatures
and humidity will shorten pot-life and working time.
Reagent |
Results |
ASTM 1308, Covered 7 days. |
|
Skydrol Unaltered |
Unaltered |
Betadine Unaltered |
Unaltered |
Calcium Chloride 20% Unaltered |
Unaltered |
Ammonia 20% Unaltered |
Unaltered |
Trisodium phosphate 20% Unaltered |
Unaltered |
Caustic Soda 20% Unaltered |
Unaltered |
Javex 3% Unaltered |
Unaltered |
Mineral spirits Unaltered |
Unaltered |
Methanol Unaltered |
Unaltered |
Toluene Unaltered |
Unaltered |
Xylene Unaltered |
Unaltered |
Hydrochloric acid 10% |
Unaltered |
Citric acid 10% |
Unaltered |
Lactic acid 5% |
Unaltered |
Unleaded petrol |
Unaltered |
Coffee |
Unaltered |
Tea |
Unaltered |
Beer |
Unaltered |
Skydrol |
Unaltered |
Nitric acid 10% |
Some yellowing |
Sulfuric acid 10% |
Slightly discolored |
Surface characteristics vary, and as a best practice, it’s vital to establish a sample area before commencing your project. To ensure proper adhesion and color consistency, we recommend conducting on-site testing utilizing the method endorsed by our representative. Additionally, sampling existing coatings can help identify contaminants
or potential delamination.
Abide by surface preparation guidelines, as outlined in ICRI Guideline No. 310.2R, titled "Selecting and Specifying Concrete Surface Preparation for Sealers, Coatings, Polymer Overlays, and Concrete Repair." It’s essential that the concrete substrate maintains a pH level of 9 or higher. Standard procedure dictates the removal of all bond-breaking materials.