Basalt Structural Fibers are extruded from naturally mined igneous rock that has been melted and wound into useful rods or fibers for reinforcing concrete. The superiority to traditional reinforcement is astounding:
- Improved tensile strength
- Thermal stability
- Non-reactive with air or water
- Non-corrosive
- Alkali resistant
- Advanced heat and sound insulating properties
- Non-combustible
- Explosion Proof
- Non-toxic
- Chemical resistant
Coming from a single element, basalt rock, Basalt Structural Rods and Fibers naturally assimilate into concrete or cement based products. They readily replace traditional reinforcement, and always improve the final product.
BASALT FIBER LOADING
Low - 1 ½ lbs. per cubic yard
Medium - 2 lbs. per cubic yard
High - 3 lbs. per cubic yard
BASALT FIBER MIXING
Introduce fibers into mix at a rate slow enough to prevent bunching and clumping.
DISPOSAL
Contact your local government household hazardous waste coordinator for information on disposal of unused product.
LIMITATIONS
For use by trained professionals that have read the complete TDS and SDS.
WARRANTY AUTIONS
PACKAGING
Basalt Fibers 1” - 6 lbs
KEEP OUT OF REACH OF CHILDREN. When used according to direction, no hazard is anticipated.
Inhalation: Avoid breathing of airborne dust, particularly present during mixing, handling, or cutting. Use NIOSH approved respirator for nuisance if threshold limit values are unsafe.
Skin Contact: Skin contact will cause irritation. Gloves should be worn when handling. Remove contaminated clothing and wash affected skin with soap and water. Launder clothing before reuse. If symptoms persist, seek medical attention.
Eyes: Wear safety eye protection during mixing, handling, or cutting. Contact with eyes will cause irritation. Flush eyes with water for 15 minutes. If symptoms persist, seek medical attention.